Comprehensive environmental simulation solutions engineered for precision, reliability and performance � from Temperature to Vibration testing.
No products found in this category.
Environmental chambers, also known as climatic chambers, are advanced testing systems used to simulate a wide range of environmental conditions in order to evaluate the reliability, durability, and performance of materials, components, and complete systems.
| Equipment Model | EC-0100 | CC-0150 | ETC-150 | ETC-450 | ETC-650 | ETC-1000 | ETC-1550 |
|---|---|---|---|---|---|---|---|
| Inner Size (W×D×H mm) | 450×450×500 | 500×500×600 | 500×600×700 | 750×750×800 | 800×900×900 | 1000×1000×1000 | 1000×1200×1300 |
| Testing Volume | 100 L | 150 L | 210 L | 450 L | 650 L | 1000 L | 1550 L |
| Heating Rate | 2°C/min, 3°C/min, 5°C/min, 7°C/min, 10°C/min, 15°C/min, 20°C/min — as per IEC 60068-3-5 | ||||||
| Cooling Rate | 1°C/min, 2°C/min, 3°C/min, 5°C/min, 7°C/min, 10°C/min, 15°C/min — as per IEC 60068-3-5 | ||||||
| Temperature Range | -40°C ~ +180°C | -70°C ~ +180°C | ||||||
| Humidity Range | 20% ~ 98% RH | ||||||
| Temp Uniformity | ±0.5 ~ ±1.0°C | ||||||
| Refrigerant System | R404A & R23 | ||||||
| Compressor | Copeland (Italy) | Bitzer (Germany) | ||||||
| Power Supply Requirement | 415 VAC ±5%, 3 Phase, 50 Hz, 4 wire and Earth | ||||||
We also manufacture chambers according to the customers requirements including temperature ramp rates and size.
Check reliability under extreme conditions.
Thermal cycling, humidity exposure, and thermal shock for PCBs, semiconductors, and battery systems.
Ensure components perform in various climates.
Testing dashboards, engines, and sensors in extreme heat, cold, or humidity; simulating altitude or solar radiation.
Validate function and safety in harsh environments.
Pressure chambers for high altitude testing, vibration and thermal testing for aircraft components.
Study material degradation and lifespan.
Corrosion testing, UV exposure, and accelerated aging of metals, plastics, and composites.
Ensure drug and device stability.
ICH stability testing (temperature/humidity) for drug shelf-life and packaging integrity.
Simulate specific climates for biological studies.
Plant growth chambers, incubators for cells or microorganisms, and climate control for animal studies.
Evaluate durability during storage or transport.
Thermal shock and humidity testing on packaging used for food, electronics, or sensitive goods.
Assess reaction to climate stress.
Simulating temperature and humidity changes on insulation, windows, and HVAC systems.
Hot & Cold chambers are used for testing the effects of temperature extremes and thermal cycling on products, materials, or components. These chambers simulate a wide range of environmental conditions to evaluate reliability, fatigue, and stress performance.
| Equipment Model | HC-0100 | HC-0150 | HC-150 | HC-450 | HC-650 | HC-1000 | HC-1550 |
|---|---|---|---|---|---|---|---|
| Inner Size (W×D×H mm) | 450×450×500 | 500×500×600 | 500×600×700 | 750×750×800 | 800×900×900 | 1000×1000×1000 | 1000×1200×1300 |
| Testing Volume | 100 L | 150 L | 210 L | 450 L | 650 L | 1000 L | 1550 L |
| Heating Rate | 2°C/min, 3°C/min, 5°C/min, 7°C/min, 10°C/min, 15°C/min, 20°C/min — as per IEC 60068-3-5 | ||||||
| Cooling Rate | 1°C/min, 2°C/min, 3°C/min, 5°C/min, 7°C/min, 10°C/min, 15°C/min — as per IEC 60068-3-5 | ||||||
| Temperature Range | -40°C ~ +180°C | -70°C ~ +180°C | ||||||
| Humidity Range | 20% ~ 98% | ||||||
| Temp Uniformity | ±0.5 ~ ±1.0°C | ||||||
| Refrigerant System | R404A & R23 | ||||||
| Compressor | Copeland (Italy) | Bitzer (Germany) | ||||||
| Power Supply Requirement | 415 VAC ±5%, 3 Phase, 50 Hz, 4 wire and Earth | ||||||
We also manufacture chambers according to the customers requirements including temperature ramp rates and size.
Thermal cycling & accelerated aging.
Thermal cycling of PCBs, ICs, and assemblies; detects solder joint failures, burn-in testing.
Cold starts to high-temperature engine conditions.
Testing ECUs, sensors, batteries, lighting; validating plastics, rubber, and adhesives.
MIL-STD environmental testing.
Qualification of avionics, navigation systems; extreme arctic, desert & altitude simulations.
Battery safety & enclosure durability.
Validating smartphones, tablets, TVs, and wearable devices under thermal stress.
Storage & transport temperature validation.
Stability testing across temperature extremes for insulin pumps, diagnostic tools & devices.
Outdoor environment performance validation.
Reliability testing of base stations, antennas, and fiber optic components.
Thermal performance & safety testing.
Lithium-ion battery testing for swelling, leakage, or explosion under temperature stress.
Cold chain & high-heat transport simulation.
Ensuring materials withstand temperature cycles encountered during shipping and logistics.
Thermal stress behaviour studies.
Studying metals, polymers & composites — glass transition, expansion/contraction, and delamination testing.
A Cold Chamber is a specialized environmental testing device designed to simulate low-temperature conditions to evaluate the performance, durability, and reliability of products or components under cold environments. Used across automotive, aerospace, electronics, pharmaceuticals, and materials science industries.
| Equipment Model | CC-0100 | CC-0150 | CC-150 | CC-450 | CC-650 | CC-1000 | CC-1550 |
|---|---|---|---|---|---|---|---|
| Inner Size (W×D×H mm) | 450×450×500 | 500×500×600 | 500×600×700 | 750×750×800 | 800×900×900 | 1000×1000×1000 | 1000×1200×1300 |
| Testing Volume | 100 Liters | 150 Liters | 210 Liters | 450 Liters | 650 Liters | 1000 Liters | 1550 Liters |
| Heating Rate | 2°C/Min, 3°C/Min, 5°C/Min, 7°C/Min, 10°C/Min, 15°C/min, 20°C/min — as per IEC 60068-3-5 | ||||||
| Cooling Rate | 1°C/Min, 2°C/Min, 3°C/Min, 5°C/Min, 7°C/Min, 10°C/Min & 15°C/min — as per IEC 60068-3-5 | ||||||
| Temperature Range | -40°C ~ +180°C | -70°C ~ +180°C | ||||||
| Humidity Range | 20% ~ 98% | ||||||
| Temp Uniformity | ±0.5 ~ ±1.0°C | ||||||
| Refrigerant System | R404A & R23 | ||||||
| Compressor | Copeland (Italy) | Bitzer (Germany) | ||||||
| Power Supply Requirement | 415 VAC ±5%, 3 Phase, 50 Hz, 4 wire and Earth | ||||||
We also manufacture chambers according to the customers requirements including temperature ramp rates and size.
Preservation & blast freezing.
Storage of meat, dairy, fruits & vegetables; blast freezing to preserve freshness and extend shelf life.
GDP-compliant storage.
Storage of vaccines, blood, tissue samples & medicines under regulatory standards.
Precise conditions for experiments.
Preserving biological samples, enzymes, reagents, and cell cultures.
Temperature-sensitive chemical storage.
Prevents degradation or hazardous reactions due to temperature fluctuations.
Thermal stress & reliability testing.
Used in automotive, aerospace, and electronics industries for reliability testing of products and materials.
Large-scale on-site cold storage.
On-site cold storage for large-scale food preparation and event catering.
Transport & storage preservation.
Preserving flowers, seeds, and agricultural products during transport and storage.
A Hot Chamber (Oven) is commonly used in industrial and laboratory settings to apply controlled heat for drying, curing, heat treatment, sterilization, aging tests, baking, sintering, and evaporation processes.
| Equipment Model | HC-0100 | HC-0150 | HC-150 | HC-450 | HC-650 | HC-1000 | HC-1550 |
|---|---|---|---|---|---|---|---|
| Inner Size (W×D×H mm) | 450×450×500 | 500×500×600 | 500×600×700 | 750×750×800 | 800×900×900 | 1000×1000×1000 | 1000×1200×1300 |
| Testing Volume | 100 Liters | 150 Liters | 210 Liters | 450 Liters | 650 Liters | 1000 Liters | 1550 Liters |
| Heating Rate | 2°C/Min, 3°C/Min, 5°C/Min, 7°C/Min, 10°C/Min, 15°C/min, 20°C/min — as per IEC 60068-3-5 | ||||||
| Cooling Rate | 1°C/Min, 2°C/Min, 3°C/Min, 5°C/Min, 7°C/Min, 10°C/Min & 15°C/min — as per IEC 60068-3-5 | ||||||
| Temperature Range | -40°C ~ +180°C | -70°C ~ +180°C | ||||||
| Humidity Range | 20% ~ 98% | ||||||
| Temp Uniformity | ±0.5 ~ ±1.0°C | ||||||
| Refrigerant System | R404A & R23 | ||||||
| Compressor | Copeland (Italy) | Bitzer (Germany) | ||||||
| Power Supply Requirement | 415 VAC ±5%, 3 Phase, 50 Hz, 4 wire and Earth | ||||||
We also manufacture chambers according to the customers requirements including temperature ramp rates and size.
Drying coatings, paints, or adhesives; curing polymers, resins, or composites.
Annealing, tempering, or stress-relieving metals and alloys; preheating materials before further processing.
Sterilizing laboratory instruments or materials using dry heat.
Accelerated aging tests for materials and electronics; thermal testing of components under controlled heat.
Baking ceramics or powder metallurgy components; sintering metal powders or glass.
Removing moisture or solvents from materials under controlled thermal conditions.
A Humidity Chamber (also called a climatic or environmental test chamber) is used to simulate humidity and temperature conditions for testing products or materials under controlled environments across electronics, pharma, automotive, aerospace, and more.
| Equipment Model | HC-0100 | HC-0150 | HC-150 | HC-450 | HC-650 | HC-1000 | HC-1550 |
|---|---|---|---|---|---|---|---|
| Inner Size (W×D×H mm) | 450×450×500 | 500×500×600 | 500×600×700 | 750×750×800 | 800×900×900 | 1000×1000×1000 | 1000×1200×1300 |
| Testing Volume | 100 Liters | 150 Liters | 210 Liters | 450 Liters | 650 Liters | 1000 Liters | 1550 Liters |
| Heating Rate | 2°C/Min. , 3°C/Min. , 5°C/Min. , 7°C/Min. , 10°C/Min. , 15°C/min. , 20°C/min. , as per IEC 60068-3-5 | ||||||
| Cooling Rate | 1°C/Min. , 2°C/Min. , 3°C/Min. , 5°C/Min. , 7°C/Min. , 10°C/Min. , & 15°C/min. as per IEC 60068-3-5 | ||||||
| Temperature Range | -40°C~ +180°C , -70°C~ +180°C | ||||||
| Humidity Range | 20%~ 98% | ||||||
| Temp Uniformity | ±0.5~ ±1.0°C | ||||||
| Refrigerant System | R404A & R23 | ||||||
| Compressor | Copeland (Italy) | Bitzer (Germany) | ||||||
| Power Supply Requirement | 415 VAC ±5%, 3 Phase, 50 Hz, 4 wire and Earth | ||||||
We also manufacture chambers according to the customers requirements including temperature ramp rates and size
Reliability under high humidity.
Corrosion of solder joints, insulation resistance, PCB delamination. Example: smartphones for tropical climates.
Product stability & efficacy.
ICH stability testing, packaging integrity. Example: shelf life testing for tablets in blister packs.
Parts durability in environmental conditions.
Fogging, corrosion, moisture ingress testing — dashboards, wiring harnesses, sensors.
Harsh environments during flight or storage.
Moisture resistance, material expansion, avionics reliability. Example: cockpit instrument condensation resistance.
Color fastness & mildew resistance.
Aging under high humidity, drying performance. Example: sportswear for tropical usage.
Performance in humid conditions.
Barrier performance, label adhesion. Example: vacuum-sealed food packaging.
Longevity & mold resistance.
Swelling, warping, and delamination under moisture. Example: wood panels or insulation foam.
Performance & safety in high humidity.
Corrosion, condensation inside products. Example: electric toothbrushes or coffee machines.
A Vibration Integration Chamber combines environmental simulation (temperature & humidity) with mechanical vibration testing to simultaneously assess product reliability under real-world combined stress conditions — used extensively in aerospace, automotive, defence, and electronics industries.
| Models | Unit | WC-15625 | WC-22500 |
|---|---|---|---|
| Dimension (W×D×H) | mm | 2500×2500×2500 | 3000×3000×2500 |
| inch | 98×98×98 | 118×118×98 | |
| Test Space Volume | Ltr | 15625 | 22500 |
| Temperature Range | °C | -20/-40/-60/-70 to +200 | -20/-40/-60/-70 to +200 |
| Ramp Rate* | °C/min | 1/3/5/6/7/8/10 | |
*Customized ramp rates are also available.
Standards: MIL-STD-810, RTCA DO-160
Testing avionics, missiles, satellites & structural components; simulating launch, flight, and re-entry thermal cycles.
Standards: ISO 16750, SAE J1211
Testing ECUs, battery packs, infotainment & chassis — simulating road vibrations, temperature changes & long-term wear.
Drop, transport & usage vibration testing.
Mobile phones, laptops, circuit boards & power supplies — resistance under varying temperature and vibration.
Track vibration & weather stress.
Components in trains, buses, or metro systems — performance under track/road vibration and weather-related stress.
Wind, Solar — long-term reliability.
Inverters, control electronics & battery storage systems — reliability under constant environmental and mechanical stress.
Transport & field-use safety.
Portable diagnostic equipment, implants & monitoring devices — safety and accuracy under transport and field conditions.
Structural & electronic resilience.
Antennas, base stations & satellite communication devices — resilience under mechanical vibration and environmental exposure.
A Walk-In Chamber is a large, enclosed environmental test space allowing personnel to walk in or place large equipment inside. Used across automotive, aerospace, electronics, pharmaceuticals, and defence industries to simulate extreme environmental conditions at scale.
| Models | CWC-15625 | CWC-22500 | CWC-26250 | CWC-91000 Ltr. | CWC-105000 Ltr. |
|---|---|---|---|---|---|
| Dimension D/L (mm) | 2500 | 3000 | 3000 | 7000 | 7000 |
| Dimension W (mm) | 2500 | 3000 | 3500 | 5000 | 4000 |
| Dimension H (mm) | 2500 | 2500 | 2500 | 2600 | 3750 |
| Dimension (inch) | 98×98×98 | 118×118×98 | 118×118×98 | 118×118×98 | — |
| Test Space Volume (Ltr.) | 15625 | 22500 | 26250 | 91000 | 105000 |
| Temperature Range (°C) | -20/-40/-60 to +180°C | -20/-40/-60 to +180°C | -20/-40/-60 to +180°C | -40/-60 to +180°C | -40/-60/-70 to +180°C |
| Ramp Rate (°C/min) | 1/3/5/6/7/8/10 °C | ||||
| Humidity Range (%RH) | Standard Range: 10% to 98% (Limited by a 6°C dew point and maximum dry bulb of +85°C) | ||||
We also manufacture chambers according to the customer's requirements, including temperature ramp rates and sizes.
Component & whole-vehicle testing.
Dashboards, wiring, sensors; full vehicle systems; thermal shock & cycling for batteries, ECUs, and HVAC systems.
Altitude & qualification testing.
High-altitude low-pressure simulation; thermal cycling for defence electronics; aircraft materials & military-grade hardware.
Accelerated life & thermal testing.
ALT testing, thermal management validation of PCBs, sensors & power supplies; humidity & corrosion resistance.
ICH stability & shelf-life testing.
Drugs, vaccines & biologics; packaging integrity; storage simulation for biologic samples & clinical trial materials.
Reliability & safety testing.
Appliances, tools & consumer electronics; packaging validation; material behaviour under stress (plastics, metals, textiles).
Solar, battery & wind component testing.
Solar panel testing; battery cycling & degradation studies; wind turbine component evaluation in extreme weather.
Prototype validation & R&D.
Controlled environments for new product development; simulation of real-world challenges; long-term reliability studies.
Thermal Shock Chambers test the reliability and durability of products under extreme and rapid temperature changes. Crucial in automotive, aerospace, electronics, and defence industries to simulate real-world thermal stress conditions.
| Models | Unit | TS-36 | TS-65 | TS-125 | TS-210 | TS-340 | TS-1000 |
|---|---|---|---|---|---|---|---|
| Test Basket Dimension (W×D×H) | mm | 300×300×400 | 400×400×400 | 500×500×500 | 600×600×600 | 700×700×700 | 1000×1000×1000 |
| inch | 12×12×16 | 16×16×16 | 20×20×20 | 24×24×24 | 28×28×28 | 39×39×39 | |
| Test Basket Volume | Ltr | 36 | 65 | 125 | 210 | 340 | 1000 |
| Hot Zone Temperature Range | °C | Ambient to +200 | |||||
| Cold Zone Temperature Range | °C | Ambient to -70 | |||||
| Basket Transition | < 10 sec | ||||||
| Recovery Time | < 5 min | ||||||
We also manufacture chambers according to customers' requirements including custom sizes and configurations.
Solder joints, PCBs & IC packages.
Testing for cracking or delamination in microchips, PCBs & solder joints — electronic components sensitive to thermal stress.
Sensors, ECUs & engine parts.
Rapid temperature changes (winter starts, engine heat) — ensuring component resilience in dashboards, sensors & control units.
Avionics & satellite components.
Extreme sudden temperature changes in flight or space — high durability required for avionics and defence systems.
Smartphones, tablets & wearables.
Daily temperature exposure (indoors to outdoors) can degrade performance — assessing long-term reliability.
Thermal expansion/contraction failures.
Verifying thermal shock resistance in LEDs — ensuring long lifespan and reliability under fluctuating temperatures.
Metals, plastics, composites, ceramics.
Physical behaviour under thermal stress — developing materials with better thermal endurance and structural integrity.
Varying climate & sudden temp shifts.
Testing brake systems, connectors & control modules — performance under varying climate conditions.
Production batch stress screening.
Routine stress screening to detect manufacturing defects early and ensure long-term product reliability.
An Altitude Chamber (hypobaric chamber) is a dedicated enclosed space used to simulate high-altitude conditions up to 120,000 feet, with integrated temperature and humidity control. Used in automotive, electronics, aerospace, and defence for critical product validation.
CATH Chamber — Combined Altitude, Temperature & Humidity
REVEAL Altitude Test Chambers are engineered to replicate extreme environmental conditions, allowing manufacturers to validate product performance under varying pressure, temperature, and humidity levels. Ideal for industries where reliability is critical — automotive, aerospace, defence, and electronics.
Material (External)
Cold Rolled Mild Steel
Grade (Inner)
SS-304
Capacity
125 / 512 / 1000 L
Accuracy
±1°C | Altitude ±3
Heating
Inconel Rod Heaters
Temperature Range
-65°C to +150°C
Altitude Range
Ambient to 1 mbar (~150,000 ft)
Altitude Method
Vacuum Pump Mechanism
Control System
HMI / PLC / PID
Cooling Type
Air or Water Cooled Mechanical Refrigeration — Air Condenser (20–25°C) / Water Condenser (8–20°C)
Cooling Rate
As per requirement
Altitude Simulation up to 120,000 ft
Vacuum pump mechanism, range to 1 mbar
Precise Temperature & Humidity Control
±1°C accuracy with full climatic conditioning
Rapid Thermal Cycling Capabilities
Fast ramp rates: 1 / 2 / 3 / 5 °C/min
User-Friendly Interface & Data Logging
HMI / PLC / PID control with full data capture
Temperature and pressure control — for altitude & thermal testing without humidity.
Temperature, pressure, and humidity control — full combined environmental simulation.
125 L
288 L
421 L
1000 L
| Models | Unit | AC-150 | AC-270 | AC-420 | AC-1000 | AC-1875 |
|---|---|---|---|---|---|---|
| Test Space Dimension (W×D×H) | mm | 500×400×750 | 600×600×750 | 750×750×750 | 1000×1000×1000 | 1000×1250×1500 |
| inch | 20×16×30 | 24×24×30 | 30×30×30 | 39×39×39 | 39×49×59 | |
| Test Space Volume | Ltr | 150 | 270 | 420 | 1000 | 1875 |
| Temperature Range | °C | -60 to +120 | ||||
| Ramp Rate* | °C/min | 1/2/3/5 | ||||
| Altitude Range | mbar | Up to 10 | ||||
*Customized ramp rates are also available.
A Dust Chamber simulates dusty environments to test equipment durability and performance in industrial, laboratory, and research settings. Used for IP5X/IP6X ingress protection testing and MIL-STD compliance across electronics, automotive, defence, and outdoor equipment sectors.
| Models | Unit | DTC-1500 | DTC-4050 |
|---|---|---|---|
| Dimension (W×D×H) | mm | 1000×1000×1500 | 1500×1500×1800 |
| inch | 39×39×59 | 59×59×71 | |
| Test Space Volume | Ltr | 1500 | 4050 |
| Temperature Range | °C | +10 to +50 | +10 to +50 |
| Pressure | Up to 1 mbar | ||
We also manufacture chambers according to the customer's requirements, including sizes and configurations.
Reveal Environmental Solutions Pvt. Ltd. offers state-of-the-art Industrial Rain Test Chambers — providing a controlled environment for testing the durability, stability, and performance of products exposed to rain and moisture conditions. From electronics to automotive components, our chambers simulate real-world weather to evaluate resilience.
A Rain Test Chamber (also known as a Rain Simulator or Rainfall Testing Chamber) is a controlled testing environment designed to simulate the effects of rain and moisture. It helps assess the waterproofing capabilities of products by mimicking rainy conditions, testing resistance to rain pressure, humidity, and temperature fluctuations — ensuring durability and reliability in outdoor environments.
Easily program and monitor test parameters such as pressure, test duration, and more — full control over your testing process.
Custom Rain Spray Test Chambers built to your specific testing needs — adjustable rainfall intensity, spray angles, and exposure duration.
Built with years of expertise to the highest standards — durable construction ensuring long-term performance and accurate, reproducible results.
Meets IS-9000, JSS-55555, PV3501, JIS D 0203, and IP ingress protection ratings — accuracy and reliability assured.
Realistic rain conditions for durability & performance testing across automotive, electronics & construction.
Adjustable rainfall intensity, spray angles & duration — simulate a wide range of environmental conditions.
High build quality for long-term performance and reliable, reproducible test results.
User-friendly interface reduces operational complexity and saves time during setup and monitoring.
Meets IP ratings and international environmental testing norms — essential for global safety & quality verification.
Efficient & consistent rain simulation — uniform conditions for accurate, repeatable results every time.
Helps assess new materials or designs under real-life rain & moisture exposure — optimize products before launch.
| Model | ARC800IPX12M | ARC1000IPX12M | ARC600IPX34M | ARC3000IPX56M | ARC160IPX14C | ARC850IPX14C | ARC850IPX16C | ARC2450IPX16C |
|---|---|---|---|---|---|---|---|---|
| Numeral | IPX1-2 | IPX1-2 | IPX1-2 | IPX5-6 | IPX1-4 | IPX1-4 | IPX1-6 | IPX1-6 |
| Description | Drip Tank | Drip Tank | Osculating Tube | Jet Spray | Drip Tank and Osculating Tube | Drip Tank and Osculating Tube | Drip Tank, Osculating Tube and Jet Spray | Drip Tank, Osculating Tube and Jet Spray |
| Size (mm) | 800×800 | 1000(W)×1000(D) | Radius: 600 | — | 500(W)×500(D)×650(H) | 900(W)×900(D)×1050(H) | 900(W)×900(D)×1050(H) | 1300(W)×1300(D)×1450(H) |
| Size (inches) | 31.5×31.5 | 39.37(W)×39.38(D) | Radius: 23.62 | — | 19.69(W)×19.69(D)×25.60(H) | 35.43(W)×35.43(D)×41.34(H) | 35.43(W)×35.43(D)×41.34(H) | 51.18(W)×51.18(D)×57.08(H) |
We also manufacture chambers according to the customer's requirements, including temperature ramp rates and sizes.
Mobile phones, outdoor electrical equipment — waterproofing & ingress protection validation.
Headlights, tail lights, and weather-exposed components — durability under rain & moisture conditions.
Solar-powered lights, garden lights, tunnel lights — performance reliability in wet environments.
Components and control systems used in water features — continuous moisture exposure testing.
Sealants, cladding, roofing, insulation — water resistance and structural integrity under rain exposure.
Reveal Environmental Solutions Pvt. Ltd. offers advanced Salt Spray Chambers (also known as Cyclic Corrosion Chambers), specially designed to test the corrosion resistance of materials treated with various surface coatings — paint, electroplating, anti-rust oil, and more. These chambers replicate marine environments, enabling precise testing of salt fog resistance and performance.
| Models | Unit | STC-420 | STC-560 | STC-840 | STC-1200 |
|---|---|---|---|---|---|
| Test Space Dimension (W×D×H) | mm | 750×750×750 | 1000×750×750 | 1500×750×750 | 2000×750×800 |
| inch | 30×30×30 | 39×30×30 | 59×30×30 | 79×30×32 | |
| External Dimension (W×D×H) | mm | 890×936×833 | 1140×936×833 | 1636×936×833 | 2140×936×833 |
| inch | 35×37×33 | 45×37×33 | 64×37×33 | 84×37×33 | |
| Test Space Volume | Ltr | 420 | 560 | 840 | 1200 |
| Temperature Range | °C | Ambient to +70 | |||
We also manufacture chambers according to the customer's requirements, including sizes and configurations.
Testing car body parts, chassis, wheel rims & metal components for resistance to rust and degradation in harsh weather.
Evaluation of aircraft parts, especially those exposed to salty marine or high-altitude environments.
Assessment of metal components, connectors & devices for durability in humid or corrosive conditions.
Testing metals used in buildings, bridges & structures exposed to varying weather conditions.
Evaluation of materials used in ships, submarines & marine equipment to resist saltwater corrosion.
Verifying durability of coatings — paint, electroplating, anodizing, galvanizing — across industrial applications.
We design and manufacture fully customized test chambers to your exact specifications � any size, any combination of parameters.
Custom design to meet your exact test requirements
Complete delivery from concept to commissioning
Integration with existing test setups & automation